The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Brakes

Sort by Title

Sort by Price

Page 6 of 10

1 2 3 4 5 6 7 8 9 10

Brake Disc Front RH EBC

BRA28614 Fits Le Mans 1000, 750 SP, Strada 750, 750 Targa, Nevada 750 (1991-2001), Lario, T5, SP II, Monza 2, V75, V35 3

Dimensions:
270mm OD x 5.8mm

Complete drilled fully floating stainless steel EBC Brake Disc for front right hand side

Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc. Use disc bolt BRA30460

part in stock 1 in stock

28613670-z 28613670 GU28613670 28 61 36 70
2861 3670 2861.3670 28.61.36.70

£169.10

INC VAT

£140.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Master Cylinder Cap and Rubber Front Brembo PS13

BRA29250 Fits Cali EV (1997-2001), Cali 1100, Cali 3, Mille GT, Nevada 350, Nevada 750 ALL, Spada 3, Le Mans 1000, 1000S, Strada 750, 750 Targa, Mille GT, V65 Florida, V75 PA

Dimensions:
57mm x 33mm cap

Front brake master cylinder cap and rubber kit for Brembo PS 13 / PS16 master cylinder. Screw holes parallel to top and bottom edges

Brembo ref. 110430860

part in stock 1 in stock

Also fits Ducati 907 i.e.

£18.90

INC VAT

£15.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Brake Pipe

BRA17650 Fits Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, Convert, Cali 2, G5, Mille GT, S3, T3, T3 Cali

Dimensions:
Length 239mm, ,15mm tip to under hex head

Steel fixed rear brake pipe with threaded connectors at each end

Rigid brake pipe

part in stock 1 in stock

17658650 GU17658650 17 65 86 50
1765 8650 1765.8650 17.65.86.50

£39.90

INC VAT

£33.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Double Banjo Fine Thread Stainless Steel

BRA01003 Universal Part

Dimensions:
M10 double banjo fine thread

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

part in stock 1 in stock

£24.50

INC VAT

£20.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
1 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

PS15 Rear Master Cylinder With Reservoir

BRA10802 Fits 1000 SP, SP II, Spada 3, Convert, G5, T3, T4, Le Mans 1, Le Mans 2, Le Mans 3, Cali 3, Cali 2, Cali 1100 (1994-1997), Mille GT

PS 15 rear master cylinder with plastic reservoir

Brembo no. 10.2426.00. Replaces original part with cast reservoir which is no longer available. Also replaces guzzi ref. 29667000. Please note that reservoir is slightly taller than the original, and you may need swap the operating arm from your old master cylinder if this is a different type.

This part is available by special order, request a quote

10438802 GU10438802 10 43 88 02
1043 8802 1043.8802 10.43.88.02

£158.00

INC VAT

£131.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Master Cylinder Cap and Seal PS15 Brembo

BRA14101 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75 (4 valves per cylinder), Nevada 750, 850T, V7 Sport, 750S, S3

Dimensions:
58mm OD

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

Sorry this part is no longer available Sorry, this part is no longer available.

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

this part is no longer available
Sorry this item is out of production

Bolt Kit Rear Brake Master Cylinder PS15

BRA14450 Fits S3, Convert, G5, Cali 2, Cali 3, Cali 1100 (1994-1998), Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT, Le Mans 1, 1000 SP, Spada 3, T3, T4, T5

Bolt kit containing the mounting and pivot bolts for PS 15 rear brake master cylinders

Also known as Guzzi ref. 17667150, 18659450

variable availability Availability varies on this part, check availability

14659450 GU14659450 14 65 94 50
1465 9450 1465.9450 14.65.94.50

£25.00

INC VAT

£20.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Lever Black

BRA14605 Fits Le Mans 1, Le Mans 2, Le Mans 3, T3, 1000 SP, G5, V65, Convert, V35C, Imola, V50C, V50 3, Monza

Dimensions:
5.8mm internal diameter mounting hole

Black brake lever for PS12 and PS15 round master cylinders. Can also be used as clutch lever on some Ducati models that have hydraulic clutches

Includes threaded preload ajuster

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14605650-z 14605650 GU14605650 14 60 56 50
1460 5650 1460.5650 14.60.56.50

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda

£24.00

INC VAT

£20.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Disc Drilled Front

BRA14650 Fits Le Mans 1, Le Mans 2, Le Mans 3

Dimensions:
300mm diameter

Drilled original type two part front brake disc, black centre

Always fit new brake pads when replacing a brake disc - see BRA54724 . TUV Approved. Needs 6 brake disc bolts BRA98460 Rotor is available as BRA14659

This part is available by special order, request a quote

14613350-z 14613350 GU14613350 14 61 33 50
1461 3350 1461.3350 14.61.33.50

£249.00

INC VAT

£207.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 6 of 10

1 2 3 4 5 6 7 8 9 10